Gravity: Formaldehyde (HCHO) Sensor is a module for measuring the concentration of formaldehyde (methane) in the air. It can be supplied with voltage in the range of 3.3 ... 6V. DFRobot SEN0231

A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±30 A range with galvanic isolation. It features an analog VOUT output with a sensitivity of 44 mV/A and a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance (~1.6 mΩ) minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5441

This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. The version comes with soldered screw terminals and a 240 Vrms jumper. Pololu 5412

This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. The version comes with soldered screw terminals. Pololu 5411

Module with pressure and temperature sensor BMP280. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020192

This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. Pololu 5410

Module with a 3-axis MMA7660FC accelerometer with a measuring range up to ± 1.5g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020039

Module with a flame sensor or other light sources with a wavelength in the range of 760 to 1100 nm. It was based on the YG1006 sensor (photovolver NPN). The sensor has a connector compatible with the Grove standard. Seeed studio 101020049

Occupancy sensor based on 24 GHz millimeter wave technology with FMCW, enabling precise detection of people, measuring distances up to 25 m and movement speed. Thanks to high resistance to environmental interference, it works reliably in conditions such as dust, light or temperature changes, outperforming traditional PIR and ultrasonic sensors. Compact size and installation flexibility make it perfect for intelligent lighting, security systems and building automation. DFRobot SEN0609

Compact light sensor that provides precise measurement of both illuminance (10–10000 Lux) and correlated color temperature (2700K–6500K), with low measurement errors. Thanks to I2C and UART interfaces, the sensor easily integrates with platforms such as Arduino or Raspberry Pi, making it an ideal tool for photographers, filmmakers and projects requiring lighting control. DFRobot SEN0611

The ACS72981 current sensor module uses the Hall effect to precisely and safely measure DC current while providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes power loss and offers a fast response time of less than 2 µs. Pololu 5284

Compact current sensor based on TMR technology, enabling precise measurements up to 20 A with minimal energy losses. Thanks to a wide 1 MHz bandwidth, galvanic isolation and interference immunity, it is perfect for applications requiring fast response and high accuracy. Pololu 5316

The module enables unidirectional AC and DC current measurement over a range from 0 A to 50 A. XtremeSense™ TMR technology, an electrically isolated current path, 1 MHz bandwidth, and an analogue voltage output support use in systems requiring fast current measurement and high dV/dt immunity. Pololu CT433-HSWF50DR Large Carrier 0–50 A, 3.3 V

The module enables unidirectional AC and DC current measurement over a range from 0 A to 65 A. XtremeSense™ TMR technology, an electrically isolated current path, 1 MHz bandwidth, and an analogue voltage output support use in systems requiring fast current measurement and high dV/dt immunity. Pololu CT433-HSWF65DR Large Carrier 0–65 A, 3.3 V

The INA3221 module, which allows simultaneous measurement of voltage and current for three power supplies via I2C with ±1% precision. With a 13-bit ADC and built-in 0.05Ω shunt resistors, it allows accurate monitoring of currents up to ±3.2A and voltages up to +26VDC. Adafruit 6062

A robust sensor for approximate measurement of nitrogen, phosphorus and potassium (NPK) levels in soil, ideal for precision farming and field applications. With a rugged design (IP68), RS485 MODBUS-RTU communication and a wide power supply range, it allows easy integration with Arduino-type systems and operation in harsh environmental conditions. DFRobot SEN0605

Module with 15 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4215

Wind direction sensor with a measuring range up to 60 m/s and 360° ensures high accuracy and fast response time, thanks to the use of low-resistance bearings and precision components. It supports various output signal types, including analog (0–5 V, 4–20 mA) and digital (RS485, LoRa, GPRS, 4G), enabling broad integration in meteorological, agricultural, and industrial systems. The durable polycarbonate construction and IP65 protection rating ensure reliable operation even in harsh environmental conditions.

Laser ToF distance sensor based on the VL53L1X, providing distance measurements up to 4 m at a ranging frequency of up to 50 Hz. Equipped with a Class 1 940 nm infrared emitter and SPAD receiver, it communicates via the I2C interface. The module operates from a 3.3 V to 5 V supply and comes with a pre-installed 200 mm GH4P cable. Designed for use with the Pixhawk 4 flight controller. Holybro ST VL53L1X Lidar

Module with 2 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4202