Jrk G2 18v27 - DC motor controller
ID: 571451
5906623478644
zł629.10
Tax included
zł511.46 tax excl.
DC motor driver with voltage 6.5..30V and maximum continuous current 27A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3148
Description
Jrk G2 18v27 USB Motor Controller is a single-channel DC motor driver. The voltage supplying the motors is from 6.5 to 30 V (recommended maximum voltage 34 V). The control can be carried out via the USB port, TTL serial interface, I2C, RC receiver signal or via analog input. The controller enables easy implementation of a closed loop of engine speed control by connecting an analog or frequency input. It also allows configuration of engine operation parameters via a USB interface and a free application.
properties
- Operating voltage: 6.5 ... 30 V (absolute maximum, 30 V maximum recommended)
- Continuous output current: 27 A
- Simple bi-directional DC motor control
- Automatic reverse polarity protection
- Five control interfaces
- USB interface - Virtual COM port (microUSB connector)
- Serial TTL (UART) interface
- I2C interface
- Signal from RC apparatus (PWM 50 Hz, 5-10% filling)
- Analogue signal input
- Feedback
- Analog signal (0 - 5 V)
- Frequency for closed loop speed control using pulse counting (in the case of high frequency feedback) or pulse clocking (in the case of low frequency feedback)
- Configuration via USB interface
- PID coefficients (tuning parameters)
- Maximum current
- Maximum working cycle
- Maximum acceleration and delay
- Error response
- Input calibration (learning) for analog and RC control
- Dimensions: 30.5 x 43 x 10.5 mm
- Weight: 10 g
Included
- Driver Jrk G2 18v27 USB Motor Controller
- 2 x 2-pin screw connector
- Simple male goldpin connector
571451
Data sheet
- Output current
- 27 A
- Number of channels
- 1
- Supply voltage min
- 6,5 V
- Supply voltages max
- 24 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC).
zł450.07
24h
Available quantity: 1
Available
DC motor driver with voltage 6.5 ... 40V and maximum continuous current 13A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3147
zł460.81
24h
Available quantity: 1
Available
DC motor driver with voltage 6.5..40V and maximum continuous current 21A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3149
zł598.54
Delivery date unknown
No product available!
DC motor driver with voltage 4.5..28V and maximum continuous current of 2.6A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3143
zł232.62
Delivery date unknown
No product available!
DC motor driver with voltage 4.5..28V and maximum continuous current of 2.6A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3142
zł225.57
Delivery date unknown
No product available!
Other products in the same category (16)
2x1.2A DC Motor Driver is a dual controller of DC motors with a Gravity connector, supplied with 2.5 ... 12V voltage with a maximum current consumption of 1.2A (3.2A peak) per channel. DFRobot DRI0044-A
zł40.02
24h
Available quantity: 1
Available
2x1.2A DC Motor Driver is a dual controller of DC motors powered with 2.5 ... 12V voltage with a maximum current consumption of 1.2A (3.2A peak) per channel. DFRobot DRI0044
zł20.82
24h
Available quantity: 3
Available
Dual MAX14870 Motor Driver is a dual DC motor controller compatible with the Arduino standard that allows you to control two DC motors with 4.5 ... 36V continuous current of 1.7A. Polol 2519
zł134.43
24h
Available quantity: 2
Available
Dual MAX14870 Motor Driver is a dual DC driver compatible with Raspberry Pi that allows you to control two DC motors with 4.5-36V continuous current of 1.7A. Pololu 3759
zł143.97
24h
Available quantity: 1
Available
ual MAX14870 Motor Driver is a dual DC motor driver compatible with the Raspberry Pi standard that allows you to control two DC motors with 4.5 ... 36V continuous current of 1.7A. Pololu 3758
zł111.39
24h
Available quantity: 2
Available
This powerful motor controller makes closed-loop speed or position (but not both!) control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC).
zł450.07
24h
Available quantity: 1
Available
DC motor driver with voltage 6.5 ... 40V and maximum continuous current 13A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3147
zł460.81
24h
Available quantity: 1
Available
DC motor driver with voltage 6.5..30V and maximum continuous current 27A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3148
zł629.10
4 weeks
No product available!
DC motor driver with voltage 6.5..40V and maximum continuous current 21A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3149
zł598.54
4 weeks
No product available!
The controller enables to supply the motors with voltage in the range of 10-47V and power consumption in continuous operation of 1.7A (4.5A peak) for each channel in dual or 3.4A mode (9A peak) in single channel mode. Pololu 2999
zł56.09
24h
Available quantity: 2
Available
TB9051FTG Single Brushed The DC Motor Driver Carrier is a single DC motor driver that allows the motor to be supplied with voltage in the 4.5 ... 28V range and power consumption at a continuous 2.6 A (5A peak) operation. Pololu 2997
zł47.04
24h
Available quantity: 1
Available
DC motor driver module with two channels, dedicated to use in modeling. It can be controlled by an RC transmitter and uses the PPM signal. DFRobot DFR0513
zł69.46
24h
Available quantity: 1
Available
The expansion module is designed to work with micro:bit. It allows you to control 4 DC motors or two stepper motors and 8 servos. It communicates via the I2C interface. DFRobot DFR0548
zł84.92
24h
Available quantity: 2
Available
Dual DC motor controller designed for Arduino, which enables the motor to be supplied with voltage in the 4.5 ... 28V range and power consumption in continuous operation of 2.6 A (5A at the top) of two DC motors. Polol 2520
zł122.25
24h
Available quantity: 1
Available
Dual DC motor controller designed for Raspberry Pi, which enables the engine to be supplied with voltage in the 4.5-28V range and power consumption in continuous operation of 2.6A (5A in peak) of two DC motors. Pololu 2762
zł155.91
24h
Available quantity: 1
Available
Dual DC motor controller designed for Raspberry Pi, which enables the engine to be supplied with voltage in the 4.5-28V range and power consumption in continuous operation of 2.6A (5A in peak) of two DC motors. Self-assembly set. Pololu 2761
zł134.54
24h
Available quantity: 1
Available
DC motor driver with voltage 6.5..30V and maximum continuous current 27A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3148