New products
New products New products
Available
zł73.14
24h
Available
zł1,049.01
24h
Available
Gravity: Analog Water Pressure Sensor - analog water pressure sensor
ID: 569876
zł88.89
Tax included
zł72.27 tax excl.
Water pressure sensor with 3-pin Gravity interface. It enables the measurement of liquid pressure in the range from 0 to 1.6 MPa. It is supplied with the voltage of 5 V and has a linear output voltage from 0.5 to 4.5 V. DFRobot SEN0257
Description
Water pressure sensor with 3-pin Gravity interface. It enables the measurement of liquid pressure in the range from 0 to 1.6 MPa. It is supplied with the voltage of 5 V and has a linear output voltage from 0.5 to 4.5 V. The sensor allows to detect the presence of a liquid and measure its pressure. It can be widely used in smart home control systems and in the IoT area. There is a user manual and examples of use on the Wiki page.
Features
- Liquid/gas
- Gravity-3Pin connector
- Pressure measurement range: 0 to 1.6 MPa
- Analog interface
- Output voltage: 0.5 to 4.5 V
- Measurement accuracy: 0.5% to 1% FS (0.5%, 0 to 55°C)
- Threaded: G1/4
- Adapter: G1/2 to G1/4
- Protection level: IP68
- Elapsed time: <2 ms
- Normal working pressure: ≤2MPa
- Failure pressure: ≥3.0MPa
- Number of cycles of use: 10,000,000 times
- Supply voltage: 5V
- Current consumption: 2.8 mA
- Working temperature: -20 to 85°C
Kit contains
- Water pressure sensor
- G1/2 to G1/4 adapter
569876
Data sheet
- Interface
- Sygnał analogowy
- Type of sensor
- inny
- Power supply voltage
- 5 V
- Sensor type
- Ciśnienia cieczy
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 117
Available
Available
The arduino turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. SEN0189
zł70.60
24h
Available quantity: 4
Available
Other products in the same category (16)
Module with environmental sensors for Raspberry Pi Pico. It allows you to measure temperature, humidity, air quality pressure and color detection. SB Components 22366
zł208.80
24h
Available quantity: 3
Available
Module with waterproof barometer and MS5837 temperature sensor. It enables pressure measurement in the range from 300 to 1200 hPa and communicates via I2C
zł102.35
4 weeks
No product available!
BMP390 digital barometer module. Measures pressure from 300 to 1250 hPa and temperature from -40℃ to 85℃. It communicates via an I2C or SPI interface. Waveshare BMP390 Barometric Pressure Sensor
zł53.73
24h
Available quantity: 3
Available
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM472
zł75.68
24h
Available quantity: 7
Available
KAmodLPS331 is a module that allows the measurement of atmospheric pressure in the range of 260 - 1260 hPa with a resolution of 0.02 hPa. Supply voltage 2.5 - 5.5 V,
zł22.90
24h
Available quantity: 283
Available
Module with waterproof barometer LPS33HW. It enables pressure measurement in the range from 260 to 1260 hPa and communicates via I2C or SPI. Adafruit 4414
zł92.51
24h
Available quantity: 3
Available
Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C. SparkFun SEN-13905
zł112.74
24h
Available quantity: 2
Available
Miniature pressure measurement module equipped with a 25 psi piezoresistive pressure sensor. It allows you to perform calibrated and compensated pressure measurements from 60 mbar to 2.5 bar. SparkFun SEN-16476
zł146.44
3 weeks
No product available!
Module with BME680 sensor to measure the concentration of volatile organic compounds, pressure, temperature and humidity. It communicates via the I2C interface. Pimoroni PIM357
zł115.82
24h
Available quantity: 5
Available
Module with digital barometer ICP-10111. The system enables pressure measurement in the range from 300 to 1100 hPa with an accuracy of 1 Pa. DFRobot SEN0516
zł33.91
24h
Available quantity: 3
Available
I2C BME680 Environmental Sensor is a gas, pressure, temperature and humidity sensor in one MEMS housing. The module is supplied with 3.3-5V, for communication the I2C or SPI interface is used. DFRobot SEN0248
zł112.72
24h
Available quantity: 3
Available
Module with a pressure sensor DPS310 with high measurement accuracy. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020812
zł43.39
24h
Available quantity: 3
Available
BME280 integrates onboard temperature sensor, humidity sensor and barometer. It provides both SPI and I2C interfaces; and can be widely used in environmental monitoring, story height measurement and Internet of Things (IoT) control and so on. SEN0236
zł99.29
24h
Available quantity: 4
Available
LPS22DF digital barometer module. It enables pressure measurement in the range from 260 to 1260 hPa and communicates via I2C or SPI. Pololu 2898
zł48.22
24h
Available quantity: 1
Available
Module with integrated BME688 gas, pressure, temperature and humidity sensor placed in one MEMS housing. It is equipped with an I2C interface. Adafruit 5046
zł101.84
24h
Available quantity: 3
Available
Pressure sensor module with I2C interface (BMP085)
zł74.89
24h
Available quantity: 5
Available
Water pressure sensor with 3-pin Gravity interface. It enables the measurement of liquid pressure in the range from 0 to 1.6 MPa. It is supplied with the voltage of 5 V and has a linear output voltage from 0.5 to 4.5 V. DFRobot SEN0257