Gravity: UART Fiber Optic Transceiver - module for fiber optic communication

Gamepad module with joystick and buttons designed for micro:bit development kit. Its shape and design resemble that of a portable game controller. DFRobot DFR0536

Module with an infrared sensor AMG8833 - a measurement matrix with a resolution of 64 pixels (8x8). It offers an accuracy of 2.5°C and the ability to detect people at a distance of up to 7 m. Communication with the sensor is via the I2C interface. SparkFun SEN-14607

A small module with a 3-axis magnetometer based on the Melexis MLX90393 system. Its resolution is 0.161 μT. I2C or SPI interface is used for communication. The I2C interface has been derived on connectors compatible with the Qwiic standard. SparkFun SEN-14571

The platform is based on the Atmega 32U4 microcontroller with a default Arduino compatible bootloader, 26 O / I ports and a microUSB port. Polol 3145

Expansion module (output expander) dedicated to the Circuit Playground Express board. Controlled by the I2C interface, it provides an IO interface, PWM, audio outputs, LED driver, DC motors and a Darlington circuit. Adafruit 3093

Expansion module with a DAC/ADC converter and a camera dedicated to FireBeetle ESP32. It allows you to create versatile IoT applications. DFRobot DFR0498

Gravity: I2C 12-Bit DAC is a module with 12-bit DAC and built-in EEPROM memory. The module is powered by 3.3 ... 5V for communication used by the I2C interface. DFRobot DFR0552

Sensor module for use in the area of virtual reality (VR). It was based on the BNO080 chip, which integrates the accelerometer, gyroscope and magnetometer with the ARM Cortex M0+ microcontroller. SparkFun SEN-14686

Development board based on the MediaTek MT7681 chip. Provides easy access to five GPIO pins and one UART port. The MT7681 module is a compact SoC Wi-Fi system with a built-in TCP / IP stack. Seeed Studio 113990100

Grove Breakout for LinkIt 7697 is a baseplate for the LinkIt 7697 module containing Grove standard connectors. The 12 Grove connectors include, among others, I2C interface lines, debugging lines (SWD), analog lines and digital lines. The kit does not contain the LinkIt 7697 module. Seeed Studio 102990803

GrovePi + is an extension in the form of a HAT overlay intended for Raspberry Pi computers (B / B + / A + / 2/3/3 +). The module has 15 connectors to which modules / sensors compatible with the Grove standard can be connected. Seeed Studio 103010002

Gravity: I2C ADS1115 The 16-Bit ADC Module is an analogue-to-digital converter module for Arduino and Raspberry Pi. This module uses 16-bit ADC ADS1115 and is powered by 3.3 ... 5V. DFRobot DFR0553

Module with EEPROM memory, capacity 512 kbit (64kB). Communication takes place via the I2C interface. The module has 3 jumpers that enable selection of one of 8 addresses. SparkFun SPX-14764

KAmodMPL3115A2 is a module with an atmospheric pressure sensor MPL3115A2 from NXP. Sensor allows to make a measurement in the range of 200...1100hPa (20...110kPa). Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMPL3115A2

KAmodMMA8451Q is a module with the MMA8451Q three-axis accelerometer from NXP. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g, the measurement frequency is from 1.56 Hz to 800 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMMA8451Q

The X-NUCLEO-STMODA1 provides an easy way to expand your STM32 Nucleo board with the STMod+ connector, which allows interaction with the new set of STM32 Nucleo development boards using this connector