Fermion: SHT40 Temperature & Humidity - module with temperature and humidity sensor
ID: 588837
5906623407446
zł37.10
Tax included
zł30.16 tax excl.
Module with a temperature and humidity sensor based on the SHT40 system. It communicates via the I2C interface. SEN0428
Description
Module with a temperature and humidity sensor based on the SHT40 system by Sensirion. It is characterized by high reliability and stability with low energy consumption, fast response and resistance to interference. It has an accuracy of ± 1.8% when measuring relative humidity from 25 to 75% and an accuracy of ± 0.2°C when measuring temperature from 0 to 75°C. The module is compatible with 3.3 V and 5 V controllers, and communication is via the I2C interface. Full documentation is available on the product page.
Features
- Temperature measurement:
- Range: -40 to 125 ° C
- Resolution: 0.01 ℃
- Accuracy: ± 0.2 ° C
- Response time: 2s
- Moisture measurement:
- Range: 0 to 100% RH
- Resolution: 0.01%
- Accuracy: ± 1.8% RH
- Response time: 6 s
- I2C interface (address 0x44)
- Supply voltage: 3.3 V to 5 V
- Current consumption: up to 0.45 mA
- Dimensions: 14 x 17 mm
- Mounting holes 2 mm
Kit contains
- Fermion: SHT40 Temperature & Humidity
- 4-pin goldpin connector
588837
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 53
Available
Available
Temperature and humidity sensor SHT20 closed in a waterproof housing. Communication via the I2C interface. DFRobot SEN0227
zł114.75
24h
Available quantity: 1
Available
SHT35 Digital Temperature & Humidity Sensor Breakout - module with SHT35 temperature and humidity...
Module with a digital temperature and humidity sensor based on the SHT35. Communication via the I2C interface. DFRobot SEN0333
zł82.71
24h
Available quantity: 4
Available
Module with a digital temperature and humidity sensor based on the SHT31-F system. Communication via the I2C interface. DFRobot SEN0332
zł64.44
24h
Available quantity: 2
Available
Other products in the same category (16)
Module with temperature and humidity sensor TH02. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020074
zł64.23
24h
Available quantity: 3
Available
Module with temperature, humidity and pressure sensor BME680 from Bosch. The module communicates via I2C or SPI interfaces.
zł45.77
24h
Available quantity: 13
Available
Module with sensors of environmental parameters. It allows you to measure temperature, humidity and pressure as well as CO2 and VOC concentration. DFRobot SEN0335
zł136.19
24h
Available quantity: 2
Available
Precision sensor from Bosch for measuring humidity with ±3% accuracy, barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy Adafruit 2652
zł75.58
24h
Available quantity: 3
Available
relative humidity sensor with integrated temperature sensor for highly accurate measurements at low power. With the TI HDC1080, you can determine the relative humidity of the environment with up to 14 bits of resolution. Digilent 410-347
zł87.98
3 weeks
No product available!
I2C BME680 Environmental Sensor is a gas, pressure, temperature and humidity sensor in one MEMS housing. The module is supplied with 3.3-5V, for communication the I2C or SPI interface is used. DFRobot SEN0248
zł112.72
24h
Available quantity: 2
Available
Analogue temperature and humidity sensor module based on SHT30 sensor. It is characterized by high reliability and stability with low energy consumption. It is compatible with 3.3V and 5V controllers, such as Arduino, micro:bit, ESP32. DFRobot DFR0588
zł31.05
24h
Available quantity: 2
Available
Module with a temperature and humidity sensor based on the SHT31-D system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 2857
zł80.49
24h
Available quantity: 1
Available
Module with BME680 sensor for measuring the concentration of volatile organic compounds (VOC), pressure, temperature and humidity. I2C or SPI communication. DFRobot SEN0375
zł81.49
24h
Available quantity: 1
Available
Temperature and humidity sensor SHT20 closed in a waterproof housing. Communication via the I2C interface. DFRobot SEN0227
zł114.75
24h
Available quantity: 1
Available
Module with SHT31 temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020212
zł52.95
24h
Available quantity: 2
Available
Temperature and humidity sensor module based on the HTS221 chip. Equipped with a STEMMA QT connector, it communicates via an I2C or SPI interface. Adafruit 4535
zł57.90
24h
Available quantity: 3
Available
Module with a digital temperature and humidity sensor based on the SHT31-F system. Communication via the I2C interface. DFRobot SEN0332
zł64.44
24h
Available quantity: 2
Available
Module with a digital temperature and humidity sensor based on the SHTC3 system. Communication takes place via the I2C interface. SparkFun SEN-16467
zł53.92
24h
Available quantity: 2
Available
A module with an AHT20 industrial grade temperature and humidity sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101990644
zł41.98
24h
Available quantity: 2
Available
Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C (Qwiic). SparkFun SEN-15440
zł84.89
24h
Available quantity: 4
Available
Module with a temperature and humidity sensor based on the SHT40 system. It communicates via the I2C interface. SEN0428