Plantower PMS3003 - laser dust sensor
ID: 563980
5906623455942
zł95.25
Tax included
zł77.44 tax excl.
Laser sensor of air pollution with particles PM1,0, PM2.5 and PM10. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. Data is output to the UART interface. PMS3003
Description
Laser sensor of air pollution with particles PM1.0, PM2.5 and PM10. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. Data is output to the UART interface.
properties
- Laser particle concentration sensor PM2.5 in the air
- Work scope (PM):
-
- 0.3 μm - 1.0 μm
- 1.0 μm - 2.5 μm
- 2.5 μm - 10 μm
- Built-in fan that takes air samples
- UART interface
- Power supply: 5 V
- Interface voltage: 3.3 V
- Power consumption (maximum): 120 mA
- Power consumption (sleep mode): <200 uA
- Working temperature range: -10 ~ 60 ° C
- Small dimensions: 65 x 42 x 23 mm
- Weight: 35 g
Description of leads
Attention!
The voltage on the RX, TX, RESET, SET signal lines must not exceed 3.3 V. If you want to control the module with a higher voltage, we recommend using a logic converter, eg KAmodLVC .
The sensor is protected with a blue foil. The foil has only a protective role.
| Contact | Name | Description |
|---|---|---|
| 1 | VCC | + 5V |
| 2 | GND | Mass |
| 3 | SET | Sleep (when low) |
| 4 | RXD | Data collection line |
| 5 | TXD | Data transmission line |
| 6 | RESET | Resetting (when low) |
| 7 | NC | - |
| 8 | NC | - |
Included
- Plantower PMS3003 dust sensor module
- JST cable with isolated terminals
To download
563980
Data sheet
- Interface
- UART
- Type of sensor
- inny
- Power supply voltage
- 5 V
- Concentration measurement
- PM1.0/PM2.5/PM10
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
PMS7003 is a kind of digital and universal particle concentration sensor, which can be used to obtain the number of suspended particles in the air, i.e. the concentration of particles, and output them in the form of digital interface
zł107.07
Delivery date unknown
No product available!
Laser sensor of air pollution with particles PM1,0, PM2.5 and PM10. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. Data is output to the UART interface. Planter PMSA003-C
zł94.89
Delivery date unknown
No product available!
Other products in the same category (16)
Sharp GP2Y1010AU0F dust and particle concentration sensors. It is supplied with the voltage from 5 to 7V. Has an analog output. DFRobot SEN0144
zł61.46
24h
Available quantity: 4
Available
Module with air quality sensor SGP30. It allows you to read the concentration of VOC (TVOC) and eCO2 and communicates via the I2C interface. Pimoroni PIM480
zł102.93
24h
Available quantity: 1
Available
ENS160 gas sensor module to measure the concentration of carbon dioxide (eCO2) and volatile organic compounds (TVOC) in the air. It communicates via an I2C or SPI interface. SparkFun SEN-20844
zł119.84
24h
Available quantity: 3
Available
Module with environmental sensors for Raspberry Pi Pico. It allows you to measure temperature, humidity, air quality pressure and color detection. SB Components 22366
zł208.80
24h
Available quantity: 3
Available
Laser sensor of air pollution with PM2,5 and PM10 particles. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. The data is output to the UART interface and via the PWM signal. Nova Fitness SDS018
zł147.14
24h
Available quantity: 2
Available
Module with PM2.5 dust sensor. The board is equipped with a Gravity connector and communicates via the I2C interface. DFRobot SEN0460
zł202.34
24h
Available quantity: 1
Available
Module with PM2.5 HM3301 dust sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020613
zł150.23
24h
Available quantity: 1
Available
The SCD-40 CO2, temperature and humidity sensor module provides high accuracy readings. It is equipped with a Qwiic connector and communicates via an I2C interface. SparkFun SEN-22395
zł484.35
24h
Available quantity: 1
Available
Dust Sensor, A simple Air Monitor
zł58.90
24h
Available quantity: 3
Available
Available
Compact MEMS environmental sensor capable of measuring temperature, humidity, pressure and VOC, with I2C and SPI support and AI-powered gas analysis. Ideal for projects such as weather stations, smart home systems and air quality monitors, it provides high measurement precision and integration flexibility. DFRobot SEN0617
zł132.15
24h
Available quantity: 2
Available
Module with SGP30 gas sensor. The sensor communicates via the I2C interface. SGP30 system contains several elements reacting to various metal oxides, which allows for more accurate determination of air quality. Adafruit 3709
zł111.60
24h
Available quantity: 1
Available
Air quality sensor module based on the ENS160 system. It communicates via the I2C interface (Gravity connector). DFRobot SEN0514
zł97.10
24h
Available quantity: 2
Available
Air quality sensor module based on the SGP40 system. It uses CMOSens technology by Sensirion and provides information on the concentration of volatile organic compounds (VOC). Adafruit 4829
zł74.80
24h
Available quantity: 2
Available
Module with sensors of environmental parameters. It allows you to measure temperature, humidity and pressure as well as CO2 and VOC concentration. DFRobot SEN0335
zł136.19
24h
Available quantity: 2
Available
Module with gas sensor designed to monitor indoor air quality. It was based on the AMS CCS811 system that allows the detection of volatile organic compounds (VOCs) in the air. Digilent 410-386
zł174.70
24h
Available quantity: 1
Available
Laser sensor of air pollution with particles PM1,0, PM2.5 and PM10. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. Data is output to the UART interface. PMS3003