modHC-05 (Compactible) płytka z modułem Bluetooth odpowiednikiem HC-05

ModCC2540-A1 allows the use of Bluetooth transmission features BLE 4.0 - thanks to the built-in CC2540 chip, it is possible to create complex projects without the use of an additional microcontroller. modCC2540-A1

Module with SIM868 designed for GSM, GPRS communication and GNSS positioning. It can communicate within the Bluetooth 3.0 standard. SB Components 21895

The Raspberry Pi RMC20452T is a Wi-Fi 4 and Bluetooth 5.2 module designed for use with Raspberry Pi microcontrollers like the RP2040. It offers low power consumption and simple integration thanks to its gSPI interface and full radio certification. Ideal for IoT projects, home automation, and wireless communication systems

WRL-13019

Compact, low-power 2.4 GHz Bluetooth Beacon solution, ideal for sensor monitoring, asset tracking, and real-time location. With extremely low power consumption, it can operate for years on a 3V button cell battery, making it an efficient choice for IoT applications. Configuration of the module is simple and intuitive thanks to the InPlay NanoBeacon Config Tool, which enables easy programming without the need to write code, providing a user-friendly graphical interface to set the device parameters. SparkFun WRL-21293

Board with the Artemis chip, the GNSS ZOE-M8Q module and the Iridium 9603N satellite receiver. It allows you to send and receive short messages with data anywhere in the world. SparkFun WRL-18712

A development board that combines the u-blox NINA-B306 Bluetooth module, the ISM330DHCX 6DoF IMU sensor, and the BME280 atmospheric pressure sensor. It has a built-in Qwiic connector and LiPo battery connector as well as a charger and LiPo parameters monitor. SparkFun WRL-20854

Bluetooth module v2.0 + EDR (master / slave), controlled by AT + commands with built-in antenna.

The low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. The board integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. DFR0478

KAmodBT-HC05 is a Bluetooth module configured via AT commands. It has integrated LEDs indicating operating mode and connection status with the paired device, as well as a logic level translator on UART lines. KAmodBT-HC05

An efficient Bluetooth 4.0 module that ensures excellent operating parameters and significantly increases the efficiency of wireless communication. It is based on the popular Nordic BLE 4.0 nRF51822 microcontroller, which guarantees both performance and low power consumption. It has a built-in Bluetooth stack and is controlled via the UART interface using AT commands. WT51822-S4AT

AW-CB375NF wireless communication module. It supports 802.11 a/b/g/n/ac Generation 5 Wi-Fi and Bluetooth 5.0 and features an M.2 A/E Key connector. Waveshare Wireless-AW-CB375NF

WiFi/BLE module that supports both the 2.4 GHz and 5 GHz WiFi bands, as well as Bluetooth Low Energy (BLE 4.2) communication. It has a u.FL connector dedicated to connecting an external antenna and a connector with a 2.54 mm pitch, which greatly facilitates prototyping. Tibbo WA2000U

Advanced wireless communication module, based on the Bluetooth 5.4 stack (Bluetooth® Low Energy, BLE), which was designed using the efficient Nordic NRF52805 SOC system. The module offers support for the UART interface, available only in peripheral mode, which allows for effective operation as a data bridge (Data Bridge). Sparkfun WRL-25466

Quectel MC60ECA-04-BLE