PCIe to 4x 2.5G Ethernet Board (B) - Ethernet module for Raspberry Pi 5 - Waveshare 33364
ID: 1202984
zł210.17
Tax included
zł170.87 tax excl.
PCIe expansion module for Raspberry Pi 5 with four 2.5G Ethernet RJ45 ports, operating in plug and play mode without driver installation, compatible with Raspberry Pi OS. Waveshare PCIE TO 4-CH 2.5G ETH Board (B)
Description
PCIe to 4-Ch 2.5G ETH Board (B) is designed to expand Raspberry Pi 5 with four independent 2.5G Ethernet network ports. The connection is established via the 16-pin PCIe interface of Raspberry Pi 5, enabling stable and parallel data transmission without loading the USB bus, even at increased network throughput.
The module operates in plug and play mode and does not require driver installation under Raspberry Pi OS. The integrated RTL8156 Ethernet controller and VL805 expansion chip provide support for 10/100/1000/2500 Mb/s standards on each RJ45 port. Power is supplied directly through the PCIe interface, eliminating the need for an additional power source.
This solution is suitable for building high-performance software routers, firewalls, home servers, NAS systems, edge devices, and test environments where multi-port Ethernet connectivity with increased bandwidth is required in a compact form factor.
Features
- Interface and compatibility
- Interface: 16-pin PCIe
- Intended use: Raspberry Pi 5
- Supported operating system: Raspberry Pi OS
- Operating mode: plug and play, driver-free
- Network
- Number of Ethernet ports: 4
- Port type: RJ45
- Network standard: 10/100/1000/2500 Mb/s
- Ethernet controller: RTL8156
- LED indicators: solid green LED, blinking yellow LED
- Chipset
- Expansion chip: VL805
- Power supply
- Supply voltage: 5 V
- Power method: via PCIe cable
- Physical properties
- Product type: Ethernet expansion module
- Version: 4-Ch 2.5G ETH Board (B)
Kit includes
- 1x PCIe to 4-Ch 2.5G Ethernet Board (B)
- 1x 16-pin PCIe cable, 40 mm
- 1x Mounting screws set
1202984
Data sheet
- Compatible with
- Raspberry Pi 5
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
HAT module designed for Raspberry Pi minicomputer. Powala adds two CAN interfaces to the project. Waveshare 2-CH CAN HAT
zł88.29
24h
Available quantity: 3
Available
The module from SIM7080G is designed for NB-IoT and Cat-M communications. It also enables the use of GNSS systems for positioning. Waveshare SIM7080G Cat-M/NB-IoT HAT (EN)
zł120.11
4 weeks
No product available!
SIMCom 4G SIM7600G-H module kit designed to work with Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H 4G HAT (B)
zł348.52
4 weeks
No product available!
GSM/GNSS expansion module dedicated to Raspberry Pi minicomputers. Allows to equip RPi with LTE Cat-1/3G/2G communication and positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. Waveshare SIM7600E LTE Cat-1 HAT
zł248.14
24h
Available quantity: 2
Available
NFC reader module dedicated to the Raspberry Pi. It is based on the PN532 operating in the 13.56 MHz frequency range. Waveshare PN532 NFC HAT
zł96.42
4 weeks
No product available!
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
zł130.08
4 weeks
No product available!
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1268 433M LoRa HAT
zł95.96
4 weeks
No product available!
A two-channel RS485 expansion module designed for the Raspberry Pi. It uses the TP75176E transceiver and CH432T chip and offers a stable connection between devices. DFRobot DFR0824
zł131.28
24h
Available quantity: 2
Available
The EM060K-GL LTE Cat-6 module kit is designed for use with the Raspberry Pi minicomputer. It supports communication over the high-speed LTE-A network and GNSS positioning. Waveshare EM060K-GL LTE Cat-6 HAT
zł455.69
4 weeks
No product available!
The Quectel 5G RM520N-GL module kit is designed for use with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare RM520N-GL 5G HAT (with case) (EU)
zł1,251.56
24h
Available quantity: 1
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
zł105.24
24h
Available quantity: 2
Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
zł106.85
24h
Available quantity: 5
Available
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1262 433/470M LoRaWAN HAT
zł68.25
4 weeks
No product available!
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT
zł68.27
4 weeks
No product available!
HAT module designed for the Raspberry Pi minicomputer. It allows you to add an RS485 interface and a CAN bus to the project, allowing for wired communication of many devices over long distances. SB Components 21444
Regular pricezł102.90zł89.90
24h
Available quantity: 1
Available
The KAmodRPi UART RS485 ISO is an advanced RS485 bus transceiver for the Raspberry Pi, featuring automatic transmission direction control, galvanic isolation, surge protection, and support for up to 128 modules at a transmission speed of up to 500 kbps, powered by 5V with low power consumption
zł67.70
24h
Available quantity: 144
Available
PCIe expansion module for Raspberry Pi 5 with four 2.5G Ethernet RJ45 ports, operating in plug and play mode without driver installation, compatible with Raspberry Pi OS. Waveshare PCIE TO 4-CH 2.5G ETH Board (B)