EM1000-1024K-T-01 – programmable BASIC Ethernet module with 4 UART ports and RTC

Ethernet expansion module with LAN8710A chip and two RJ45 connectors. Dedicated for Galatea FPGA development boards. Numato Lab GTETH1002001

EM510 MiniMo is a programmable IoT module with ultra-compact dimensions, equipped with a single UART, Ethernet, and optional Wi-Fi/Bluetooth connectivity. EM510-00 Tibbo Technology

3xUART - Ethernet converter enabling two-way communication between devices equipped with UART TTL ports and the Ethernet network. It is visible in the system as a virtual COM port and configured via the website or using AT commands. USR-TCP232-ED2

UART - Ethernet converter enabling two-way communication between devices equipped with UART TTL ports and the Ethernet network. It is visible in the system as a virtual COM port and configured via the website. USR-K7

Programmable miniature Ethernet module, Tibbo Technology EM500-01

USR-WIFI232-A2 is a WiFi module with UART and Ethernet interfaces, supporting the 802.11 b/g/n standard and TCP/UDP protocols. With support for STA, AP, and AP+STA modes, and simple configuration via AT commands or a web interface, the module is ideal for IoT applications, automation, remote monitoring, and control systems.

USR-M300-ETH is a versatile industrial IoT gateway with advanced edge computing capabilities, I/O support, and wide compatibility with network and cloud protocols. Ideal for remote monitoring, data acquisition, and automation in industrial, energy, and infrastructure applications.

Ethernet network module with W5500 chip and PoE (Power over Ethernet) function. It communicates via the SPI interface, it has a built-in TCP/IP stack. DFRobot DFR0850

Internal PCIe x1 network card with 1 Gb/s RJ45 port, Realtek RTL8111C chipset, Flow Control support, low-profile bracket included. Lanberg PCE‑1GB‑201

The module allows the existence of devices with BLE in networks with the Ethernet protocol, has a BT2.1 receiver

The industrial switch USR-ISF1008 offers 8 Fast Ethernet ports for reliable communication in automation and industrial environments. Its compact design, resistance to environmental conditions, and wide-range power supply enable stable operation in industrial installations that require a higher number of ports.

The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega

Carrier board dedicated to Raspberry Pi CM4 modules. It is equipped with two Ethernet connectors, a microSD slot and a USB connector. It allows you to build a small router. DFRobot DFR0767

Ethernet Module

USR-IO0440 is an expansion module for systems based on USR-M100, featuring 4 analog inputs (4–20 mA) and 4 relay outputs. It is used in industrial applications that require integration of additional sensors and actuators within a distributed I/O system.

USR-M300-EW is an industrial IoT gateway with 2.4/5.8 GHz WiFi and Ethernet, designed for collecting and transmitting data from serial and I/O devices. It supports MQTT, Modbus RTU/TCP, VPN, and cloud integration. The compact design, flexible expansion capabilities, and advanced local control functions make the device ideal for industrial applications, automation, and distributed systems.