Category: Electronic modules

The ESC RC controller module is designed for brush motors with a supply voltage from 3.5 to 6 V and a capacity of 1 A

USB port isolator based on the ADUM3160 chip. The device has a rated insulation voltage of 1500V. The isolator is powered from the USB port.

Bluetooth 4.2 audio receiver with 5W stereo amplifier per channel. It allows you to play files via Bluetooth interface and supports WAV, APE, MP3 and FLAC formats. MH-M38

Protection circuit for four Li-Ion cells with a voltage of 14.8V. The module has the function of charging cells with the option of a balancer, discharging and a function that protects the cells from excessive discharge. The cells can be charged with continuous current up to 10A

The current measurement with a value of 0 - 5A is realized by the ACS712-05 system based on the Hall effect. The system sensitivity is 185mV / A (analog signal).

KAmod RS232H-mini is a miniature RS232 to TTL converter, operating in the voltage range of 3-5.5 V, supporting all RS232 signals, with a male DB9 connector, 2.54 mm goldpin pins, based on the MAX3243/SP3243 system, offering ESD protection up to 15 kV and a signal conversion direction corresponding to a DTE/Host device

The protection circuit for one Li-Ion cell with a voltage of 3.7 V. It has the function of charging, discharging and over-discharge protection. The cells can be discharged with a continuous current of up to 12 A

JTAG interface galvanic separator that protects equipment against damage caused by potential differences, with a maximum clock frequency of 110 MHz, 3-5 V power supply, and isolation voltage up to 1 kVDC, equipped with multiple connectors and optical status signaling

Module with SSR 240V/2A relay controlled by 5V voltage with fuse. modSSR-1CH

The MQ-2 sensor allows the measurement of gas concentrations such as propane, butane, methane, LPG as well as alcohol and smoke. Sensor measuring range: up to 10,000 ppm

RS232/RS485-WiFi converter that provides easy communication between the RS232 or RS485 interface and the WiFi wireless network. Supports the Modbus RTU protocol

Step-Up converter module XL6009 with adjustable output voltage from 1.3 to 35 V, input voltage from 3.8 to 32 V and a maximum output current of 3 A

LC filter connected to the output of the DC power supply with a voltage from 0 to 25 V and a maximum current of 3 A. It reduces voltage ripple and interference caused by the power supply

Step-Up converter with an output voltage of 2 to 28 V, an input voltage of 2 to 24 V and a maximum current of 2 A

Two-axis joystick with "ENTER" button, analogue output signal

LM386 mono digital audio amplifier module. It has a voltage gain of 200 and is powered from 5V to 12V

Module with the TMC2209 bipolar stepper motor driver. It enables control with a supply voltage ranging from 4.75 to 29 V and a current of up to 2.8 A

Laser sensor of air pollution with particles PM1,0, PM2.5 and PM10. It allows for precise analysis of the amount of pollutants in the environment, has small dimensions and a built-in silent transfer fan. Data is output to the UART interface. PMS3003

The MQ-5 sensor allows the measurement of alcohol and gas concentrations, such as methane, LPG, and carbon monoxide. Sensor measuring range: up to 10,000 ppm

The DC motor driver module enables the motor to be controlled using a PWM signal with several supply voltages (3V, 6V, 12V, 24V and 35V) and a maximum continuous current of 5A.