zł136.30 tax excl.
Ultrasonic distance sensor module with a range of up to 7.5m enclosed in a waterproof and dustproof housing. It is compatible with 3.3V or 5V devices such as Arduino, Raspberry Pi DFRobot SEN0313
Waterproof ultrasonic distance sensor module with a range of up to 750 cm. It can be powered with a voltage range of 3.3 to 5 V and is compatible with 3.3 V or 5 V devices such as Arduino, Raspberry Pi etc. The average current consumption of the A01NYUB sensor is only 15 mA, so it can be powered by IO port of most controllers.
The ultrasonic sensor is enclosed in a waterproof and dustproof housing (protection class IP67), which means that it will be used in difficult and humid measuring conditions. All signal processing units are integrated in the module, communication with the module takes place via the UART interface.
An example of a sensor service code is available on the manufacturer's website.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
No product available!
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
Laser distance sensor with a measuring range of up to 2 m, based on the ToF measurement technique. Communication via the I2C interface
A miniature lidar proximity sensor that detects objects within a range of 1 mm to 130 cm by generating a PWM signal proportional to distance. It operates within a 3-5.5 V range, draws 30 mA, and features an ENABLE pin for sleep mode. It also includes a 3-pin JST SH connector and an indicator LED. Its color, transparency, and light-sensitive properties make it ideal for robotics, automation, and contactless interfaces. Pololu 5485
No product available!
Laser distance sensor with a large measuring range from 0.1 m to 180 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-180 Analog
No product available!
Ultrasonic distance sensor (sonar) with a measuring range from 20 cm to 10.64 m. It allows you to read data through one of three interfaces: variable width pulse, analog output or RS232 interface. DFRobot SEN0282
No product available!
Pololu Carrier for Sharp GP2Y0D810Z0F and GP2Y0D805Z0F Sensors
Ultrasonic distance sensor with a measuring range of 2 to 400 cm. Communicates via a standard interface (Echo, Trigger) or I2C bus. SparkFun SEN-24805
Ultrasonic distance sensor MB1040 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 794
No product available!
Ultrasonic distance sensor (sonar) with a measuring range from 20 cm to 7.65 m. It allows you to read data via the I2C interface. DFRobot SEN0274
No product available!
Module with integrated proximity and ambient light sensors and IR emitter in the VCNL4040 system. It allows the detection of obstacles in the range of 0 to 20 cm (no dead zone). It communicates via the I2C bus. SparkFun SEN-15177
Ultrasonic distance sensor (sonar) with a measuring range from 15 to 318 cm with the possibility of detecting objects in a selected zone. It allows you to read data via the USB interface. DFRobot SEN0279
No product available!
Laser distance sensor with a large measuring range from 0.1 m to 100 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF03-100 RS485/RS232
No product available!
Extension board with distance sensor ToF VL53L1, The sensor has a range of up to 400 cm. The kit includes 2 modules with sensors that can be connected via a 10-pin connector. The shield is compatible with STM32 Nucleo boards and has an Arduino UNO R3 connector. STMicroelectronics X-NUCLEO-53L1A2
Module with an integrated proximity and ambient light sensor based on the VCNL4040 system. It can detect obstacles in the range of 0 to 20 cm. It communicates via the I2C bus. Adafruit 4161
Mini module with ToF VL53L5CX sensor with a matrix of 64 pixels and a range of up to 4 m. It is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun SEN-19013
The GP2Y0A41SK0F sensor performs precise distance measurement in the range of 4–30 cm with an analog output signal adapted for operation with microcontrollers. It is used in robotics projects, obstacle avoidance systems, and automation devices detecting the presence of objects.
The GP2Y0A60SZ offers a wide detection range of 4″ to 60″ (10cm to 150cm) and a high update rate of 60Hz. The distance is indicated by analog voltage - only a single analog input is required to interface with the module. Pololu 2476
Ultrasonic distance sensor module with a range of up to 7.5m enclosed in a waterproof and dustproof housing. It is compatible with 3.3V or 5V devices such as Arduino, Raspberry Pi DFRobot SEN0313