Category: STARTER KITS, PROGRAMMERS, MODULES

Module with 16-bit AD5693R DAC converter with built-in EEPROM memory. Equipped with a STEMMA QT connector, it communicates using the I2C bus. Adafruit 5811

Development platform designed for rapid prototyping of Internet of Things devices using LTE-M and NB-IoT cellular connectivity. Based on the nRF9160 and nRF52840 devices, it integrates GPS, Bluetooth LE, NFC, and a comprehensive set of environmental and motion sensors. Nordic Thingy:91 (NRF6943)

This compact ESP32-based board offers full functionality in a package measuring just 13 x 27 mm. Equipped with a 3.3 V regulator (700 mA), 4 MB of PSRAM, a battery charger, and 27 GPIO pins, it delivers high performance with minimal power consumption. Separate 5 V and 3.3 V power paths and automatic disconnection of unused components increase energy efficiency. The TinyPICO NANO works with the Arduino IDE, MicroPython, and ESP-IDF.

ESP32-S3-Touch-LCD-3.49 in the Case B version without a lithium-polymer battery is a compact and advanced development platform with dimensions of 98.50 × 28.99 × 22.80 mm, designed for creating projects in the field of IoT, HMI interfaces and systems with speech recognition.

A compact ePaper display control board designed for Seeed Studio XIAO microcontrollers. Equipped with a 24-pin FPC connector and an ETA9740 charging chip, it safely powers and charges 3.7V Li-Ion batteries. It also includes a JST connector with a power switch and IO ports for connecting additional sensors. Seeed Studio 114993558

This expansion board is designed for light and sound, cosplay, and interactive prop projects. It features a ready-made NeoPixel port with a level converter, 3W RGB LED drivers, and a Class D audio amplifier for driving 8Ω or 4Ω speakers. The built-in LIS3DH accelerometer allows for motion, impact, and tilt detection, ideal for dynamic effects. It works with a wide range of Feather boards, allowing you to quickly create advanced projects in a compact format. Adafruit 3988

Feather development board with RP2040 microcontroller, featuring a USB-C port and a USB Type A host port, 8MB Flash memory, LiPo battery support and a STEMMA QT connector. Adafruit 5723

This precision barometric pressure and temperature sensor is ideal for environmental applications. Its low noise floor allows for detection of elevation changes down to approximately 1 cm and offers a relative accuracy of ±0.4 Pa. It supports I2C and SPI interfaces for easy integration with microcontrollers. The pre-assembled module includes a built-in 3.3V regulator, logic level conversion, and STEMMA QT connectors. Adafruit 6407

Starter kit based on ESP32-C3 with an included 1.5-inch OLED display, designed for a quick start with Arduino, MicroPython, and ESP-IDF, supported by educational resources for learning programming and IoT projects. Waveshare ESP32-C3-Zero-Basic-Kit

Programmable laboratory power supply module utilizing STEP-DOWN converter technology and STM32 control for precise voltage and output current regulation. The construction supports DC 9–36 V input, 0.5–30 V / 0–5 A output, and I2C communication, enabling the creation of regulated power systems for electronics, automation, and embedded projects.

This ESP32-S3-based development board features a dual-core 32-bit 240 MHz processor, 8 MB of Flash memory, and 2 MB of PSRAM. Equipped with 2.4 GHz Wi-Fi with a 3D antenna, a built-in 7x7 RGB LED matrix, and 22 GPIO pins, it enables the creation of advanced IoT projects, visualizations, and interactive interfaces. The module includes a LiPo battery management circuit, two 3.3V 700 mA regulators, and a USB-C connector with protection. FeatherS3 Neo

ESP32-S3 1.54inch LCD Display Development Board, 240 × 240 resolution, 262K color, Supports Dual Microphones, 2.4GHz Wi-Fi and BLE 5. Waveshare ESP32-S3-LCD-1.54

SMD IoT communication module with ESP32-S3 chip, supporting 2.4 GHz WiFi and Bluetooth BLE 5, equipped with PCB antenna and 8 MB Flash memory. Espressif ESP32-S3-WROOM-1-N8

A microphone array module designed for AI, robotics, and voice interface applications. It utilizes an XMOS XVF3800 processor and four MEMS microphones to deliver real-time audio processing with features such as noise reduction, echo cancellation, beamforming, and sound source direction detection. Its voice detection range is up to 5 meters, and its 180° pickup pattern enables precise spatial speech capture. Integration with the XIAO ESP32S3 and support for USB and I2S make the module easy to implement in embedded projects and voice control systems. Seeed Studio 100026178

Development module with ESP32-S3 chip, 1.43" round AMOLED display with 466 x 466 resolution and touch panel. Designed for IoT projects, HMI interfaces, AI Voice applications, wearable devices and WiFi/Bluetooth communication systems. Waveshare ESP32-S3-Touch-AMOLED-1.43C

A development platform based on the ESP32-S3 module, designed for projects requiring a graphical interface and voice control. Equipped with a 480x480 touchscreen display, dual microphones, and audio circuitry, it enables the creation of modern multimedia applications and AIoT systems. With 16MB of Flash, 16MB of PSRAM, and support for multiple LCD interfaces, it provides high performance and extensive design flexibility. Espressif Systems ESP32-S3-LCD-EV-Board

A development board for vision applications, based on the powerful ESP32-P4 microcontroller with a dual-core RISC-V processor. The device offers support for up to 32 MB of RAM, a built-in 2 MP camera, microphone, and LCD display, enabling real-time image and audio processing. The ESP32-C6-MINI-1U module provides Wi-Fi and Bluetooth connectivity, while numerous interfaces, including MIPI-CSI and USB 2.0, facilitate integration with other systems. Espressif Systems ESP32-P4X-EYE

Matter, Thread and Zigbee gateway based on the ESP32-S3 controller and ESP32-H2 module, designed for integrating IoT devices operating in the IEEE 802.15.4 standard. The device features a 2" IPS touch display, camera, motion sensors, USB OTG interface and two HY2.0-4P expansion connectors. Designed for DIN rail mounting, the platform supports Matter, Thread and Zigbee protocols, making it suitable for smart home systems, building automation and sensor network applications. M5Stack K149

This compact development board, featuring the ESP32-S3 module, offers high performance thanks to the Xtensa LX7 dual-core processor and a RISC-V coprocessor. Equipped with 8MB of Flash, 8MB of PSRAM, and 27 GPIO pins, it\'s ideal for IoT, AI, and memory-intensive applications. The module supports 2.4GHz Wi-Fi, Bluetooth 5.0 with Mesh, and a native USB interface with OTG and JTAG support for easy programming and debugging.

This ESP32-S3 development board features an M.2 B-Key connector for quick, solderless installation and upgrades. It features a dual-core 240MHz processor, a RISC-V coprocessor, 8MB of Flash, and 2MB of PSRAM for high performance and energy efficiency. The module supports 2.4GHz Wi-Fi, Bluetooth 5.0 + Mesh, and includes a software antenna switch between a 3D High Gain antenna and an external u.FL antenna. EdgeS3[D]