Zeenko ZK09-BM is a low-noise, ultra-wideband RF amplifier with an operating range up to 10 GHz, powered by a built-in battery. Thanks to its good linearity and noise performance, it is used in measurements, receiver paths and communication systems. Compact and mobile, it will work well both in laboratories and in the field.

The step-down converter module allows you to reduce the voltage from 24-60 V to a stable 24 V at a current of up to 8 A. High efficiency of up to 95% and low power losses make it ideal for applications requiring high current and stable power. The device has built-in overcurrent, thermal, and reverse connection protection, as well as a soft-start function and a Power Good indication. Pololu 5684

A module that provides galvanically isolated, bidirectional I²C communication (SDA and SCL lines), protecting devices from incorrect connections and voltage differences. Thanks to the TI ISO1640B chip, it supports data transfer up to 1.7 MHz. Pololu 5390

Step-Down DC-DC converter module based on the D24V150F7 chip. Input voltage 9..40V, output voltage 7.5V (max 15A). Pololu 2883

The SparkFun Continuous Rotation (CR) Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. You can use a hobby servo in your projects without having to do any programming! WIG-13872

A module that provides galvanically isolated, bidirectional I²C communication (SDA and SCL lines), protecting devices from misconnections and voltage differences. Thanks to the TI ISO1640B chip, it supports data transfer up to 1.7 MHz. Pololu 5391

DC motor driver with voltage 4.5..28V and maximum continuous current of 2.6A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3143

Digital audio amplifier dedicated to woofers. It has one channel with a power of 50 W each and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 8 to 25 V

High-speed communication module powered by ADM582E. By communicating with the device via UART, users can take advantage of the RS485 communication protocol with speeds up to 16 Mbps. 410-310

Zeenko ZK04-UM is a compact low-noise RF amplifier operating in the 100 kHz – 4 GHz range, powered via USB-C, featuring high linearity and low noise levels. Ideal for amplifying antenna signals or as a preamplifier for spectrum analyzers such as the tinySA ULTRA, especially above 3.5 GHz.

Zeenko ZK05-UM is a wideband low-noise amplifier with high gain and excellent linearity, operating in the 100 kHz – 6 GHz band. Powered via USB-C, it offers a low noise level and high overload resistance, making it a suitable choice for RF applications, antenna systems, and the input stages of spectrum analyzers.

The shield provides the standard MIDI port circuits, incl. 5-pin DIN connectors, pto-isolated MIDI input, LEDs on D6 and D7, pushbuttons on D2, D3 and D4, and rotary potentiometers on A0 and A1. DEV-12898

A speed controller based on the open VESC standard, designed for electric skateboards, scooters, and e-bikes. It supports voltages from 14 to 75 V and continuous currents up to 100 A, offering various BLDC motor control modes, and a wide range of interfaces (PPM, UART, I2C, USB-C, CAN). Its compact design and extensive security features ensure reliability, flexible configuration, and convenient integration with computers and smartphones. Makerbase VESC 75100

Zeenko ZK09-UM is a compact low-noise RF amplifier operating in the 100 kHz to 10 GHz band, powered via USB-C and equipped with on-chip bias technology. It provides high linearity, stable gain, and a wide operating bandwidth, serving as an alternative to popular microwave amplifiers in laboratory and measurement applications.

The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5389

ESC type controller for a DC motor with a supply voltage of 3.7 V to 5 V. It offers a maximum output current of up to 1.5 A and allows you to control two motors independently

A class-D audio amplifier designed for the Pimoroni Yukon platform, offering up to 25W of mono output. The module allows for connection to speakers with an impedance of 4Ω or greater and delivers clean, dynamic sound thanks to the TAS2780 chip. Equipped with a temperature sensor and screw terminals, it\'s ready to use, no soldering required. Pimoroni PIM689

Set with ODrive3.6 ESC speed controller and MKS X2212 BLDC motor. The controller is designed to power two three-phase brushless motors in various applications, such as driving robots, walking robots or gimbals. Supports input voltage range from 12 V to 56 V and maximum current up to 60 A. Makerbase ODrive3.6 Kit

The ODrive3.6 ESC speed controller is designed to power two three-phase brushless motors in various applications, such as driving robots, walking robots or gimbals. Supports input voltage range from 12 V to 56 V and maximum current up to 60 A. Makerbase ODrive3.6

An advanced speed controller designed to power three-phase brushless motors in various applications, such as driving robots, walking robots or gimbals. Supports input voltage range from 12V to 56V. Maximum constant current is 60A. Makerbase ODrive-S