RP2350 development board with a round 1.46" capacitive IPS touch display 480x480, supporting multi-touch and equipped with IMU sensors, RTC, and a wide range of interfaces. RP2350-Touch-LCD-1.46B Waveshare 32868

Development board with RP2350 microcontroller and a 7-inch touch LCD display with 800 x 480 resolution and 65K colors, supporting dual-core and dual-architecture operation, with a capacitive touch panel. Waveshare RP2350-Touch-LCD-7

Development board with RP2350 microcontroller and a 7-inch LCD display with 800 x 480 resolution and 65K colors, supporting dual-core and dual-architecture operation, in a version without touch support. Waveshare RP2350-LCD-7

This development board for building robots and mechatronics projects features 2.4 GHz Wi-Fi and Bluetooth 5.2 connectivity. Based on the RP2350 microcontroller (Dual Arm Cortex-M33 up to 150 MHz, 520 KB SRAM, 4 MB QSPI Flash), it allows you to control two DC motors via a DRV8833C H-bridge and support up to six servos. It features 12 addressable RGB (Neopixel) LEDs, ADC inputs, numerous GPIOs, and two Qw/ST headers for connecting sensors. Pimoroni PIM733

Module with RP2350B microcontroller, clock speed up to 150 MHz, 2 MB PSRAM, 16 MB Flash, 48 GPIO, 2.54 mm pitch, includes USB adapter and FPC cable, dimensions 25.40 x 25.40 mm. Waveshare Core2350B1-Kit

The board with the RP2040 microcontroller in the form of a USB dongle. Equipped with Stemma QT connector, RGB NeoPixel diode, boot and reset button. Adafruit 5056

Mini board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz and 264 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Pimoroni PIM558

The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Adafruit 4888

The board with the RP2040 microcontroller, which provides a set of 2x20-pin connectors to which you can connect the HATs of the Raspberry Pi. SB Components 24032

This Raspberry Pi RP2350B microcontroller development board features a dual-core ARM Cortex-M33 or Hazard3 RISC-V processor. It features a 2.8-inch 480x480 circular IPS display with a capacitive touchscreen and LVGL support. It includes 16MB of flash memory, a real-time clock, a 6-axis motion sensor, a microSD slot, and a lithium battery connector. It\'s ideal for HMI, IoT, and smart wearable device projects. Waveshare RP2350-Touch-LCD-2.8C

A powerful development board based on the Raspberry Pi RP2350 chip with a dual-core Cortex M33 150 MHz processor and 528 KB RAM, offering 37 GPIO pins and 16 MB of QSPI Flash memory. It supports power supply via USB-C or DC, has a DVI connector, microSD slot, Pico Probe debug port and programmable UF2 bootloader. Thanks to the wide support of programming languages ​​(C/C++, MicroPython, CircuitPython, Arduino), it will be suitable for both educational projects and advanced embedded solutions. Adafruit 6003

Versatile digital video module. It uses two RP2040 chips (one in the form of a Raspberry Pi Pico W board and the other as a separate RP2040 microcontroller) and is equipped with an HDMI output connector. Pimoroni PIM674

The RP2350-Plus-M offers the flexibility and performance required in modern embedded projects while maintaining full compatibility with Raspberry Pi Pico and its extensions. Factory-soldered headers and built-in Flash memory make the module suitable for rapid prototyping as well as educational and commercial applications.

Module with a round 0.99" IPS LCD display with a resolution of 128x115 px and an RP2040 microcontroller. Equipped with an accelerometer and gyroscope. Enclosed in a nice metal housing. Waveshare RP2040-LCD-0.99-B

Versatile digital video module. It uses two RP2040 chips (one in the form of a Raspberry Pi Pico W board and the other as a separate RP2040 microcontroller) and is equipped with an HDMI output connector. Pimoroni PIM686

NeoPixel 8-channel RGB LED driver. It features an RP2040 microcontroller with two ARM Cortex-M0+ cores, 264 kB of RAM and 8 MB of external Flash memory. Adafruit 5650

RP2350-Tiny is a minimalist development board based on the RP2350A microcontroller with dual Cortex-M33 and RISC-V architecture, without an integrated USB port. Instead, it features an FPC connector for attaching an external USB-C adapter (not included). The module offers extensive GPIO and peripheral functionality, drag-and-drop programming, support for C/C++ and MicroPython, and SMT mounting capability. It is ideal for embedded projects where minimal space and flexible connectivity are essential.

RP2350-Touch-LCD-1.28-B is a compact development module with a color touch screen, ideal for projects requiring an HMI interface and mobile integration with sensors. Thanks to the CNC enclosure, the product gains durability and better heat dissipation, making it suitable for prototyping and embedded applications where reliability and elegant design are important. Support for multiple programming languages and extensive technical documentation facilitate rapid development of applications based on ARM and RISC-V architecture.

RP2350-LCD-0.96-M is a versatile development board with a display, designed for projects based on RP2350A microcontrollers. It supports multiple interfaces and programming languages, features pre-soldered headers, and is compatible with Pico HAT modules, making it ideal for prototyping embedded systems, portable devices, and educational projects.

RP2350-LCD-1.28-B is a highly integrated development platform with a display, designed for applications requiring low power consumption and high flexibility in interface design. Thanks to its robust CNC enclosure and support for two processor architectures, the module is perfectly suited for use in portable systems, HMI devices, and intelligent embedded projects.