Category: Main categories

High-voltage differential probe. It has good measurement characteristics: a bandwidth of 50 MHz and an operating voltage of up to 1300 V. The probe has two attenuation coefficients: 50X and 500X. Hantek HT8050

High-voltage differential probe. It has good measurement characteristics: a bandwidth of 100 MHz and an operating voltage of up to 1300 V. The probe has two attenuation coefficients: 50X and 500X. Hantek HT8100

A set of needle probes used for piercing wire insulation. They can be used as pin probes when working with small PCBs or connectors. Hantek HT307

An 8-channel digital oscilloscope that connects to a computer via USB interface. It has a frequency bandwidth of 100 kHz and is equipped with more than 80 types of functions for automotive diagnostics. Hantek 1008B

The SparkFun Continuous Rotation (CR) Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. You can use a hobby servo in your projects without having to do any programming! WIG-13872

SATA to USB 3.0 adapter. It allows you to connect a 2.5" HDD or SSD to a computer via a USB connector

An e-Paper display module with a diagonal of 2.13" and a resolution of 250x122 px. It communicates via an SPI interface. Waveshare 2.13inch E-Paper HAT (G)

The TU-230PA crimper is a high-quality, professional tool for precise crimping of ferrules for coaxial cable, equipped with an ergonomic, non-slip handle and replaceable crimping heads, ideal for electricians, telecommunications installers and hobbyists

NEMA17 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a voltage rating of 12 V and draws a current of 1.7 A per coil. 42HB34F08AB

NEMA23 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 2.8 A per coil. 57BYGH76

NEMA17 bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 12 V and draws a current of 0.4 A per coil

A needle with a diameter of 0.8 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle

NEMA17 bipolar stepper motor included with a 300 mm long T8 trapezoidal screw. It has a resolution of 200 steps/revolution (1.8° per step), a rated voltage of 2.4 V and a current consumption of 1.5 A per coil. 17HD40005-300N

A needle with a diameter of 0.6 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle

A needle with a diameter of 0.5 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle

NEMA17 bipolar stepper motor. It has a resolution of 200 steps/rotation (1.8° per step), a voltage rating of 2 V and draws a current of 1.5 A per coil. 17HD40005-22B

A needle with a diameter of 0.35 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle

A needle with a diameter of 0.3 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle