Gravity: Geiger Counter - module with Geiger counter
ID: 1178727
5902186310261
zł266.91
Tax included
zł217.00 tax excl.
Module with a Geiger counter that allows the detection of ionizing radiation. Equipped with a Gravity connector. DFRobot SEN0463
Description
Module with a Geiger counter that allows the detection of ionizing radiation. It can only detect nuclear, x-ray, cosmic radiation, etc. It cannot detect electromagnetic radiation, such as radiation from microwave ovens, cell phones, or WiFi. In addition, a Geiger counter is a good random number generator and undefined ionization events of high energy particles can provide random entropy. The module is equipped with a Gravity connector and communicates via a digital interface. It is supplied with the voltage from 3.3 to 5 V. Full documentation is available on the product page.
Features
Geiger counter
- Power supply: 3.3 V to 5 V
- Signal output: digital output
- Working voltage: 400V
- Maximum range: 1200 μSv / h
- Dimensions: 107 x 42 mm
Geiger tube M4011
- Working voltage: 380V to 450V
- Background: 25CPM
- CPM ratio: 153.8 CPM / (μSv / h)
- Dimensions: Φ10 mm x 88 mm
Kit contains
- Gravity module: Geiger Counter
- 3-pin Gravity cable
1178727
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 147
Available
Available
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
zł21.41
24h
Available quantity: 4
Available
Other products in the same category (16)
Module with a magnetic sensor based on the CT10 reed switch. CT10 is a unipolar reed switch, normally open. The sensor reacts to the action of an electromagnet, permanent magnet or a combination thereof. The module has a connector in accordance with the Grove standard. Seeedstudio 101020038
zł19.83
4 weeks
No product available!
The Hall sensor module allows magnetic field detection, can be used to measure angle of rotation, displacement, mechanical vibrations, etc. The module has a connector in accordance with the Grove standard. Seeed studio 101020046
zł13.54
24h
Available quantity: 1
Available
Module with a flame sensor or other light sources with a wavelength in the range of 760 to 1100 nm. It was based on the YG1006 sensor (photovolver NPN). The sensor has a connector compatible with the Grove standard. Seeed studio 101020049
zł38.14
24h
Available quantity: 2
Available
Module with a 3-axis MMA7660FC accelerometer with a measuring range up to ± 1.5g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020039
zł64.13
24h
Available quantity: 2
Available
Module with a gesture sensor PAJ7620U2, which allows to recognize up to 13 gestures. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020083
zł60.29
4 weeks
No product available!
Module with pressure and temperature sensor BMP280. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020192
zł60.63
24h
Available quantity: 2
Available
Module with humidity and air temperature sensor based on the AM2302 system. It allows temperature measurement in the range from -40 to 80 ° C and the humidity measurement takes place in the range of 5 to 99% RH. The module has a connector in accordance with the Grove standard. Seeed Studio 101020019
zł62.32
24h
Available quantity: 5
Available
Module with digital light sensor TSL2561. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020030
zł30.71
24h
Available quantity: 1
Available
MH-Z16 carbon dioxide sensor with Grove connector. It communicates via the UART interface. Seeed Studio 101020067
zł563.83
24h
Available quantity: 1
Available
Available
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214
zł40.22
24h
Available quantity: 1
Available
Gravity: Formaldehyde (HCHO) Sensor is a module for measuring the concentration of formaldehyde (methane) in the air. It can be supplied with voltage in the range of 3.3 ... 6V. DFRobot SEN0231
zł348.46
24h
Available quantity: 2
Available
Module of the 3-axis LIS2DH, I2C accelerometer. DFRobot SEN0224
zł20.75
24h
Available quantity: 1
Available
The Digilent Pmod NAV uses the LSM9DS1 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, plus the LPS25HB digital barometer to provide users with 10-DOF functionality. Digilent 410-326
zł262.11
3 weeks
No product available!
relative humidity sensor with integrated temperature sensor for highly accurate measurements at low power. With the TI HDC1080, you can determine the relative humidity of the environment with up to 14 bits of resolution. Digilent 410-347
zł87.98
3 weeks
No product available!
Module with INA219 system with bi-directional current meter
zł10.01
4 weeks
No product available!
Module with a Geiger counter that allows the detection of ionizing radiation. Equipped with a Gravity connector. DFRobot SEN0463